The Kiruna Hybrid 2 InfraSauna is the easiest sauna to get running in a Wisconsin home. It seats two, fits a 51 inch square footprint, and plugs into a standard 120V household outlet. No 240V service, no electrician scheduling your install around a panel upgrade. You still get both kinds of heat in one cabin.
This is the detail that separates the Hybrid 2 from larger hybrid models. It runs on 120V with either a 15 amp or 20 amp configuration, using a standard NEMA 5-15R or 5-20R receptacle. Tylö recommends a dedicated circuit so the breaker is not shared with anything else, which is a far smaller electrical job than wiring a 240V line. If you have an unfinished basement corner or a spare bedroom, this cabin can likely go there.
A Sense Mini heater handles traditional mode, where you pour water over the rocks and run the room hot. CarbonFlex infrared panels handle the other mode, positioned at the back, calves, and under the bench for full-body coverage. The Bliss touchscreen runs one mode at a time by design, and each remembers your last temperature and duration settings. Traditional mode adjusts from 119 to 194 degrees, infrared from 84 to 149 degrees, with sessions up to 60 minutes and a delayed start up to 24 hours ahead.
Assembly takes two people, the door swings outward, and the cabin needs 3 to 6 inches of clearance from surrounding walls plus a reachable outlet within 5 feet. Our team confirms your ceiling height against the 81 inch cabin and walks the delivery route with you.
Stop into our Madison or Brookfield showroom and run both modes back to back. That comparison usually settles the decision faster than any spec sheet. Need more room? Compare it to the Kiruna Hybrid 3.